DIY – Unblocking Drains
If you experience some problems with your drain, such as it seeps water slowly, makes some bubbling sound, and more, then the culprit behind that issue could be blocked drains. Blocked drain is actually one of the most common plumbing problems which more people face every day. This is because people tend to not care about their drains if they have not experienced a blocked drain yet. But, do not worry because there are actually some simple do it yourself ways on how to fix blocked drains.
• If you experience a blocked drain and you already tried to fix it with a plunger but nothing significant happened, then you could actually utilize bent wire hangers. Go look for a wire hanger and make it straight. After that, bend the other end of the wire in order to make a hook. You could then start inserting the wire into the drain and begin cleaning and pulling whatever debris that caused the blockage. Avoid pushing too much because this might only cause the debris to go further into the drain. Once you have pulled several debris, you could now try running hot water in order to help some of the leftovers run down the drain.
• You could as well utilize vinegar and baking soda. Just combine equal parts of vinegar and baking soda. After mixing, it would fizz and you must immediately pour the mixture down to your blocked drain. The fizzing reaction would aid in getting rid of the accumulated dirt or debris inside the drain. Leave it for about 60 minutes or you could leave it overnight if you desire to. Once done, pour hot water.
• If you do not have much materials to use, you could actually just utilize boiling water. Use your kettle or any deep container which is suitable for boiling water. Once the water reaches its boiling point, carefully pour it down into the drain. Allow the boiling water to perform its function for a few seconds after pouring another hot water. This fixing tip is known to be the simplest and fastest way to unblock a drain.
• If your toilet is blocked by any means, you could try using a dish cleaner or detergent. Use a container and fill one fourth of it with the dish detergent. Also heat some water. The detergent will basically serve as the lubricator and would aid in breaking down those accumulated grease. You could now pour the heated water after pouring the detergent. Then you begin to use the plunger. If plunging does not work, you might want to consider using rubber gloves.
There are actually more ways on how to fix your blocked drains Brisbane. You could search through the internet and lots of easy to complex ways will be displayed. If you do not want to fix it yourself, or if you sense that there is something worse than having a blocked drain, then you could contact a professional plumber to help you. If you have no issues yet, try cleaning your drains as often as possible.